Hydraulic, aquaculture, water and BIM engineering projects
A selection of recent work. Each case describes the challenge, the solution and the tools used.
Projects
Sludge treatment plant, Caliboro hatchery
Steel structure, foundations and construction drawings for a sludge treatment plant, modelled in Revit inside an operating hatchery.
Walkway and hydraulics for Ø12 m fish tanks
Complete tank hydraulics and a steel walkway for new culture tanks, coordinated in an IFC model.
Bridge abutment protection and gravel extraction, Llaquepe river
HEC-RAS 1D and 2D modelling to protect bridge abutments and define a gravel extraction area.
CFD thermal simulation of electrical rooms
Thermal behaviour of electrical rooms on extreme heat days and during air-conditioning failure.
Debris-flow risk study for an urban ravine, Taltal
2D debris-flow modelling to assess the exposure of an urban property.
Lime dosing system with LIDAR and BIM
From LIDAR point cloud to a BIM model of each room, designing on the as-built reality.
Hydrodynamic CFD modelling of fish culture tanks
CFD comparison of inlet configurations to improve solids removal.
CFD of a circular tank and a grit chamber with deflector
Hydraulic check of a tank and improved flow split in a grit chamber.
Steel roof for a circular tank
Structural check of a lightweight tubular roof over a fish tank.
turbiascaliboro: turbidity forecasting model and alert app
A model that anticipates turbidity events at the water intake and publishes them in an alert app.
BIM model of external networks and sludge clarifier
BIM coordination of a RAS hatchery’s external networks and design of its sludge clarifier.
Site inspection of a hatchery expansion
Owner’s site inspection of an expansion with several contractors working in parallel.
Timber structure for an octagonal meeting building (ruka)
Structural design of an octagonal timber building with a radial roof, coordinated with the architectural model.
Hatchery lime distribution network
Routing and piping of the lime network of an operating hatchery, and its later expansion.
BIM plumbing design for public buildings, with G&S Arquitectos
Revit plumbing and drainage design for police stations, town halls and health centres, together with the G&S architecture firm.
Urban flood risk app
An app combining public sources and SWMM modelling to assess the flood risk of an address.
Environmental assessment for a hatchery expansion
Hydraulic sectoral permits, water resources report and renders for a hatchery expansion assessment.
Site inspection of a recirculation hatchery
Site inspection of tanks, rooms and pipework for a RAS hatchery.
Hatchery entrance landscaping
Renders and a walkthrough video to visualise a hatchery entrance before construction.
Sectoral environmental permits for hatchery assessments
Hydraulic component of PAS 155, 156 and 157 permits for hatchery environmental assessments, alongside environmental consultancies.
No projects match that filter.
Working on something similar?
Tell us the location, type of works and timeline. We will reply with a scope and a proposal.